Swimline Beaded 12' X 24' Rectangle 48 In. Depth Solid Blue Kayak
Above Ground
USD $379.99
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
OUR FINEST ABOVE-GROUND POOL LINERS Will fit Kayak®, Fanta Sea® and Olympic® Flat bottom Pools. 15-Year Warranty on our 20-Gauge liners 25-Year Warranty on our 25-Gauge liners All pool liners listed below are beaded and made to fit flat bottom pools. For 48 inch wall sizes. Hopper bottoms and other sizes available. Please email us for pricing and availability. RECOMMENDED ITEMS NEEDED FOR INSTALLATION duct tape #3 Philips headscrewdriver garden hose sharp nail or ice pick industrial vacuum or household vacuum (filter bag removed) tamping tool
Powered by Frooition
Swimline 12 ft x 24 ft Rectangle Replacement Pool Liner for Kayak Pools - Pool liners
SKU: MASTER-SKU18602
Products vary on Color and only one option is shown here. Refer to images at top of page when making your selection.
Swimline 12 ft x 24 ft Rectangle Replacement Pool Liner for Kayak Pools - Pool liners
SKU: MASTER-SKU18602
Item Description OUR FINEST ABOVE-GROUND POOL LINERSWill fit Kayak®, Fanta Sea® and Olympic® Flat bottom Pools. 15-Year Warranty on our 20-Gauge liners 25-Year Warranty on our 25-Gauge liners All pool liners listed below are beaded and made to fit flat bottom pools. For 48 inch wall sizes. Hopper bottoms and other sizes available. Please email us for pricing and availability. RECOMMENDED ITEMS NEEDED FOR INSTALLATION duct tape #3 Philips headscrewdriver garden hose sharp nail or ice pick industrial vacuum or household vacuum (filter bag removed) tamping tool masking tape utility knife
NOTE: Liner should be stored at room temperature for at least 24 hours prior to installation, for stretch-ability. PREPARATION OF POOL BOTTOM
1. Spread a 2" layer of brick sand over the entire pool foundation area inside the base rails. Use a rake to make the brick sand flat and smooth. Tamp sand to help reduce footprints. In place of brick sand, you can use "Soft Step" Floor Padding. Cut the sheets to fit and join them with duct tape along the whole length of each seam.
2. With the brick sand, make a curved cove about 4" high and 4" wide all around the bottom of the pool wall on the inside. Pack firmly into shape. Pool Cove can also be used. LINER INSTALLATION
1. Place the closed liner carton in the center of the pool.
2. Open the carton. Do NOT use anything sharp to open the carton.
3. Unfold the liner and spread it out in the sun to warm up.
4. Inspect all seams and surfaces for holes.
5. Spread out liner. The curved seam should be centered on the cove at the base of the wall. The other seams will form straight lines across the bottom of the pool. If seams appear to have flaps, check to see if correct side is up.
6. Smooth out all wrinkles in the bottom.
7. If you have a beaded liner, fasten the liner in place by lifting the sides of the liner and inserting the beaded edge into the liner retainer on the top edge. If you do not have a beaded liner, lift the sides of the liner and drape them over the top of the pool wall. Fasten liner to the top of the wall with plastic coping. Let the liner hang slack for now. Do NOT pull liner tight.
8. Start filling the pool with water. As the pool fills, work out the wrinkles and smooth the liner to the wall. Remove the plastic coping around the top edge of the wall one piece at a time and adjust the liner. Keep smoothing out the wrinkles.
9. Do not install faceplates, inlets, light fixtures, etc. until water reaches 3" below each opening. Premature installation might result in the liner tearing away from the opening due to stretching as the water level increases.
10. Proceed filling pool until water reaches desired level. OPTIONAL STEP TO ELIMINATE WRINKLES
1. To remove air from behind the liner, which prevents wrinkles, insert a vacuum cleaner hose through the skimmer hole in the pool wall behind the liner. To minimize vacuum loss, seal the opening around the hose and the water inlet using cardboard and masking tape.
2. Turn vacuum cleaner on. While vacuum is running, you should be adjusting the liner with short tugs to eliminate wrinkles. If you have trouble shifting the liner into position, shut vacuum off for a few minutes. You should then be able to adjust the troubled area before continuing with the vacuum.
3. Start filling the pool with water. The vacuum cleaner should continue to run until water level nears the top. Make sure to keep vacuum cleaner hose above the water level at all times.
You Might Like
More Items!
Swimline Overlap 30' Round Solid Blue 48/52 in. Depth Above Ground Pool Liner,
$589.99
Swimline Overlap 24' Round Blue 48/52 in. Depth Above Ground Pool Liner, Depth,
$305.65
Swimline Overlap 12' x 18' Oval Swirl Bottom 48/52 in. Depth Above Ground Pool
$278.99
Swimline Overlap 15' Round Swirl Bottom 48/52 in. Depth Above Ground Pool Liner,
$189.99
Powered by Frooition
Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.
Powered by Frooition
Swimline 12 ft x 24 ft Rectangle Replacement Pool Liner for Kayak Pools - Pool liners
SKU: MASTER-SKU18602
Swimline 12 ft x 24 ft Rectangle Replacement Pool Liner for Kayak Pools - Pool liners
SKU: MASTER-SKU18602
Item Description OUR FINEST ABOVE-GROUND POOL LINERS
NOTE: Liner should be stored at room temperature for at least 24 hours prior to installation, for stretch-ability. PREPARATION OF POOL BOTTOM
1. Spread a 2" layer of brick sand over the entire pool foundation area inside the base rails. Use a rake to make the brick sand flat and smooth. Tamp sand to help reduce footprints. In place of brick sand, you can use "Soft Step" Floor Padding. Cut the sheets to fit and join them with duct tape along the whole length of each seam.
2. With the brick sand, make a curved cove about 4" high and 4" wide all around the bottom of the pool wall on the inside. Pack firmly into shape. Pool Cove can also be used. LINER INSTALLATION
1. Place the closed liner carton in the center of the pool.
2. Open the carton. Do NOT use anything sharp to open the carton.
3. Unfold the liner and spread it out in the sun to warm up.
4. Inspect all seams and surfaces for holes.
5. Spread out liner. The curved seam should be centered on the cove at the base of the wall. The other seams will form straight lines across the bottom of the pool. If seams appear to have flaps, check to see if correct side is up.
6. Smooth out all wrinkles in the bottom.
7. If you have a beaded liner, fasten the liner in place by lifting the sides of the liner and inserting the beaded edge into the liner retainer on the top edge. If you do not have a beaded liner, lift the sides of the liner and drape them over the top of the pool wall. Fasten liner to the top of the wall with plastic coping. Let the liner hang slack for now. Do NOT pull liner tight.
8. Start filling the pool with water. As the pool fills, work out the wrinkles and smooth the liner to the wall. Remove the plastic coping around the top edge of the wall one piece at a time and adjust the liner. Keep smoothing out the wrinkles.
9. Do not install faceplates, inlets, light fixtures, etc. until water reaches 3" below each opening. Premature installation might result in the liner tearing away from the opening due to stretching as the water level increases.
10. Proceed filling pool until water reaches desired level. OPTIONAL STEP TO ELIMINATE WRINKLES
1. To remove air from behind the liner, which prevents wrinkles, insert a vacuum cleaner hose through the skimmer hole in the pool wall behind the liner. To minimize vacuum loss, seal the opening around the hose and the water inlet using cardboard and masking tape.
2. Turn vacuum cleaner on. While vacuum is running, you should be adjusting the liner with short tugs to eliminate wrinkles. If you have trouble shifting the liner into position, shut vacuum off for a few minutes. You should then be able to adjust the troubled area before continuing with the vacuum.
3. Start filling the pool with water. The vacuum cleaner should continue to run until water level nears the top. Make sure to keep vacuum cleaner hose above the water level at all times.
You Might Like
More Items!
Swimline Overlap 30' Round Solid Blue 48/52 in. Depth Above Ground Pool Liner,
$589.99
Swimline Overlap 24' Round Blue 48/52 in. Depth Above Ground Pool Liner, Depth,
$305.65
Swimline Overlap 12' x 18' Oval Swirl Bottom 48/52 in. Depth Above Ground Pool
$278.99
Swimline Overlap 15' Round Swirl Bottom 48/52 in. Depth Above Ground Pool Liner,
$189.99
Powered by Frooition
Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.
Returns Accepted for this item if it's within 30 Days
Price type
IN STOCK
OUT STOCK
.
